Fujitsu FI-6010N - Software Update Time-Period Restrictions

5.6 Setting the Central Admin Server
fi-6010N Network Scanner Operator's Guide 247
5
■ Software Update Time-Period Restrictions
Set whether to automatically update the scanner system, security, installed options, and Add-ins
using the Central Admin Server.
z Always allow
Always allow updates.
z Never allow
Never allow updates.
z Only allow in the following time period
Only allow updates within a restricted time period. Set the restricted time period with the
[Start] and [End] fields.
Workplace Enter the schema name that is to be associated with the
"Workplace" search item.
The default value is "physicalDeliveryOfficeName".
Phone Number Enter the schema name that is to be associated with the
"Phone Number" search item.
The default value is "telephoneNumber".
E-mail Address Enter the schema name that is to be associated with the "E-
mail Address" search item.
The default value is "mail". This search item cannot be
skipped.
Homepage Enter the schema name that is to be associated with the
"Homepage" search item.
The default value is "wWWHomePage".
HINT
z When an update is available for both systems (security and installed options
included) and Add-ins, if the update of systems is completed outside the speci-
fied time-period, update is not run for Add-ins.
z The length of time required for a software update can be estimated as follows:
Example: the following update case should be estimated as:
1
5 × 40 ×1.5 = 900 seconds (15 minutes)
1
z Update module size: 15 MB
z Number of scanners: 40
z Network throughput: 8 Mbps = 1 MB/s
Search Item Description
Update module size × No. of target scanners × 1.5
Network throughput