Fujitsu FI-6010N - Page 351

6.4 Sending the Scanned Data by e-Mail
fi-6010N Network Scanner Operator's Guide 315
6
6.4 Sending the Scanned Data by e-Mail
2. Select the search parameter.
The search parameters and button names shown on the left and middle buttons can be cus-
tomized. For details about customizing the search parameters and the button names, refer to
"4.7.10 Setting the LDAP Search Parameters" (page 107).
Pressing the left or middle button displays the search results according to the search parame-
ter shown on the button, in alphabetical order. If multiple items are selected, data containing
any of the search words are searched as "OR Search".
Pressing the [e-Mail Address] button displays the search results by e-mail address, in alpha-
betical order.
3. Press the [Search Position] button.
 The "Search Position" screen appears.
4. Select a search position setting.
By default, [Head (abc...)] is set.
 The screen returns to the "e-Mail Address Book" LDAP list. The selected position is dis-
played to the right of the [Search Position] button.
Search
Position
Search Method
Example
Target
Search Result
Head
(abc...)
The LDAP e-mail address book is
searched for entries which start with
the character string entered in Step 5.
abc abc, abc1, abcd, ...
Anywhere
(...abc...)
The LDAP e-mail address book is
searched for entries which include the
character string entered in Step 5.
abc abc, abc1, xabc, xabcy, ...
Tail
(...abc)
The LDAP e-mail address book is
searched for entries which end with
the character string entered in Step 5.
abc abc, 1abc, xabc, ...
ATTENTION
When the LDAP server contains several tens of thousands of
entries, "Anywhere" and "Tail" searches can take a long time.