EasyManua.ls Logo

Fujitsu FI-6010N - Page 492

Fujitsu FI-6010N
649 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
456
5 In Microsoft® Internet
Explorer, in the "Tools" menu,
"Internet Options", [Security]
tab, the security level for the
corresponding zone is set as
"High", or in [Custom level],
"Scripting", "Active script-
ing" is set to "Prompt" or "Dis-
able".
When connecting using the scanner name, the connec-
tion will be an intranet connection. When connecting
using an IP address, it will be an internet connection.
If the URL includes a scanner name, the scanner will
be connected using an Intranet Zone. If the URL
includes an IP address, the scanner will be connected
using the Internet Zone.
In Microsoft® Internet Explorer, in the "Tools" menu,
"Internet Options", try the following settings for the
corresponding zone.
z To enable "Active scripting", set in one of the fol-
lowing ways:
z In the [Security] tab, set the required "Security
level for this zone" to "Medium".
z In the [Security] tab, select the [Custom level]
button. Then, set the "Scripting", "Active
scripting" to "Enable".
z If connecting via the Internet zone, on the [Privacy]
tab, set the level to below "Medium High".
After the above settings have been performed, in
"Temporary Internet Files" or "Browsing history",
press the [Delete cookies] button to delete all tempo-
rary internet files.
6 The scanner is in standby
mode.
Press the startup button to start the scanner.
7 A proxy server is being used. Set the proxy server to not be used.
Open the "Internet Options" in the "Tools" menu of
Microsoft® Internet Explorer, then press the [LAN
settings] button in the [Connections] tab and remove
the check from the "Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN con-
nections)." option.
8 There is an error with the con-
nection protocol setting.
Check if SSL is enabled on the "Admin Network"
screen.
For more details, refer to "4.7.2 Setting the Admin
Network" (page 84).
9 There is an error with the port
number setting.
Check the specified port number on the "Admin Net-
work" screen.
For more details, refer to "4.7.2 Setting the Admin
Network" (page 84).
No. Problem Action

Table of Contents

Other manuals for Fujitsu FI-6010N

Related product manuals