518
Login LDAP server is busy. Try the following:
z Contact a system administrator
to have the network settings
checked.
"8.3 Network Connection
Troubleshooting" (page 446)
z Contact a system administrator
to have the server status
checked.
Number of user data stores has
reached the maximum allowed. New
users may not login until the old user
data stores are deleted.
Contact a system administrator to
have the user information deleted.
"Restoring the User Data Store"
(page 165)
Communicating with the Central
Admin Server.
Login is not possible while the
scanner is communicating with the
Central Admin Server.
Wait for the communication
session to finish, then try again.
User roaming data could not be
downloaded from the Central Admin
Server. OK to continue?
(If you continue, the scanner will use
the currently saved scan settings.)
Check the connection to the
Central Admin Server.
Consumable
Alert
Replace Soon Replace the consumable part when
convenient.
For details, refer to "7.6 Replacing
Parts" (page 427).
Replace Now Replace the consumable part when
convenient.
For details, refer to "7.6 Replacing
Parts" (page 427).
Scanning Document not found. Load a
document into the ADF, making sure
the side guides are adjusted correctly
and try again.
Load the document into the ADF
paper chute, and try again. Load
the document to prevent any space
between the side guides and the
edges of the documents.
For details, refer to "6.1 Loading
Documents" (page 294).
Screen Message Action
To Next Page
Loading...
