Fujitsu FI-6010N - Page 571

fi-6010N Network Scanner Operator's Guide 535
E
Others Cannot connect to the LDAP server.
Check that the LDAP access settings
are correct and that the LDAP server is
running and accessible.
Try the following:
z The network settings may not
be valid. Contact a system
administrator to have the
network settings checked.
"8.3 Network Connection
Troubleshooting" (page 446)
z The server may not be working.
Contact a system administrator
to have the server status
checked.
z If using SSL communication
when connection to the LDAP
server, contact an administrator
to check if the server certificate,
issued from a root certification
authority, is installed on the
LDAP server.
z Enter a valid user name and
password.
LDAP server response error. Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
LDAP server access failed. Check that
the LDAP access settings and LDAP
server settings are correct.
Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
LDAP server access failed. Check that
the LDAP access, LDAP server,
Authorized User (DN), Password and
Search Base settings are correct.
Try the following:
z Contact a system administrator
to check whether the LDAP
server is available.
z Enter a valid user name and
password.
The system date/time has been reset.
Check and correct the "Date/Time"
setting.
Check and correct the "Date/Time"
setting.
Screen Message Action