50
9. Select the target user(s), and press the [Next] button.
Follow the prompts of the install wizard windows until a "fi Network Scanner Admin
Tool has been successfully installed" message indicates that the installation has com-
pleted. Press the [Close] button.
When the installation is completed, logout of the scanner, and close the Web browser.
The Admin Tool should now be usable.
Select the [Start] button, select the [All Programs] - [fi-scanner V2.1] sub-menu, and then
select on the [fi Network Scanner Admin Tool].
z If this tool has already been installed, skip to section "4.5 iScanner Admin-
istrator Login: via the Admin Tool" (page 52) for details about Admin Tool
operations.
z From the Web browser [Tools] menu, select [Internet Options], and note
the following points about the settings shown on the "Internet Options" dia-
log box.
z In the [Accessibility] dialog box shown when selecting the [Accessibil-
ity] button on the [General] tab, do not change the formatting and user
style sheet settings. If these settings are changed, the displayed style
of the Admin Tool may be corrupted.
z In the "Language Preference" dialog box shown when selecting the
[Languages] button on the [General] tab, move the same language as
for the Central Admin Server operation system to the top. If a different
language is specified, a problem may occur with the input or displays
for the Admin Tool.
z On the [Security] tab, if "Security level for this zone" is set to "High",
part of the Admin Tool screen may not be correctly displayed.
In this case, on the [Security] tab, add the scanner or Central Admin
Server to the trusted site zone and select the [Default Level] button.
Or select the [Custom Level] button and set [Binary and script behav-
iors] to "Enable".
To Next Page
Loading...
