Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

12 Accessible drives
12.1 Safety notes
CAUTION
▶
Before installing an accessible drive, acquaint yourself with the
drive's user documentation.
▶
When inserting an accessible drive into the server, ensure not to
pinch or strain any connected cables.
▶
When installing an accessible drive, hold it by its sides. Applying
force to the top of the casing may cause failures.
▶
When disposing of, transferring, or returning a backup drive, ensure
that all backup media has been removed from the drive.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
For more information, see "Important information" on page 29
.
12.2 Basic information
You can install one 5.25-inch slimline ODD.
The installation bay depends on the 2.5-inch or 3.5-inch HDD configuration.
The proceeding for installing/removing is identic except the routing of the
cables and the appropriate ODD power connector on the system board, see
"Connectors and indicators" on page
342.
RX1330 M4 Upgrade and Maintenance Manual 255

Fujitsu PRIMERGY RX1330 M4 Specifications

General

Chipset	Intel C246
Processor	Intel Pentium, Intel Celeron
Memory Type	DDR4
Memory	Up to 64 GB
Memory Slots	4 DIMM slots
Drive Bays	4 x 3.5-inch or 8 x 2.5-inch
Network	2x 1GbE onboard, optional additional NICs
Power Supply	450W
Form Factor	1U
RAID Controller	optional SAS RAID controller