The serial interface connector (2) can be used as the standard interface
or for communication with iRMC. The serial interface connector is an
option.
The first left connector of OCP module can be used as Shared LAN
connector (3). OCP modules are options and available in dif
ferent
variants.
Depending on the BIOS settings, the shared LAN connector may also
be used as a management LAN connector
. For more information, see
the corresponding BIOS Setup Utility reference manual.
Some of the devices connected require special software (e.g. drivers)
(see documentation for the connected device).
Liquid cooling configuration
A LC configuration is provided on special release request only.
Figure 17: Quick connectors for liquid cooling
1 Quick connector with red marking:
water outlet
2 Quick connector with blue marking:
water inlet
Product description
40 Operating Manual RX2540 M6
To Next Page
Loading...
