▶
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see "Unpacking the server" on page
63.
▶
Ensure that you have all necessary manuals, see "About availability of
manuals" on page 15. If required, print out the PDF files.
▶
Components that have been ordered additionally may be delivered loose
with the server. For installing, see the original component documentation.
▶
Install the server in the rack, see "Installing the server in the rack" on
page 64.
▶
Connect the devices to the server. To do this, see "Notes on connecting/
disconnecting cables" on page 69 and "Connecting devices to the server"
on page 70.
▶
Connect the server to the mains, see "Connecting the power cord" on
page 72.
▶
If applicable, install the HDD/SSD modules, see "Installing HDD/SSD
modules" on page 87.
▶
If applicable, install a second PSU, see "Installing a second PSU" on
page 93.
▶
Familiarize yourself with the controls and indicators on the front and rear of
the server, see "Connectors, controls, and indicators" on page 32.
▶
Configure the server and install the desired operating system and
applications. The following options are available:
▶
Installation with ServerView Installation Manager
Local configuration and installation, see "Configuring the server with
ServerView Installation Manager" on page 78.
Remote installation, see "Configuring the server with ServerView
Installation Manager" on page 78.
For more information on installing the server (remote or local), see
the "ServerV
iew Installation Manager" user guide at https://
support.ts.fujitsu.com.
▶
Installation without ServerV
iew Installation Manager
Local configuration and installation, see "Configuring the server without
ServerView Installation Manager" on page 80.
Starting up
62 Operating Manual RX2540 M6
To Next Page
Loading...
