Fujitsu PRIMERGY RX2540 M6

Advantages of the ServerView Installation Manager:
–
Wizard-assisted configuration of your server hardware and disk arrays.
–
Wizard-assisted installation of all leading server operating systems.
–
Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
–
Installation of drivers and additional software.
The software that can be installed depends on the hardware
configuration of your server
. This configuration is detected automatically.
Configuring the controllers
When using the ServerView Installation Manager you can configure the
onboard controller either before or during installation.
▶
Configure the RAID controllers using the ServerV
iew RAID Manager.
▶
If applicable, configure the onboard SATA controller, see "Notes on
configuring controllers" on page 80.
▶
If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see "Notes on configuring controllers" on page 80.
Installing the operating system
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files under:
https://www.fujitsu.com/global/support/products/computing/servers/
primergy/drivers/
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
downloads/
For more information on installing the server, see the "ServerView
Installation Manager" user guide at https://support.ts.fujitsu.com under
Product - Software
- ServerView - Provisioning.
Starting up
RX2540 M6 Operating Manual 79