4.8 Connecting the power cord 56
4.9 Switching on the server 57
4.10 Installing the bay cover 58
4.11 Locking the server 59
5 Basic software procedures 61
5.1 Starting the maintenance task 61
5.1.1 Suspending BitLocker functionality 61
5.1.2 Removing backup and optical disk media 63
5.1.3 Verifying and configuring the backup software solution 63
5.2 Completing the maintenance task 63
5.2.1 Updating or recovering the BIOS 63
5.2.2 Reconfiguring the backup software solution 64
5.2.3 Enabling replaced components in the BIOS 65
5.2.4 Verifying the system time settings 65
5.2.5 Viewing the System Event Log (SEL) 66
5.2.6 Updating the NIC configuration file in a Linux/VMware OS 67
5.2.7 Resuming BitLocker functionality 68
5.2.8 Performing a RAID array rebuild 69
5.2.9 Looking up for MAC/WWN addresses 70
5.2.10 Using the Chassis ID Prom Tool 71
5.2.11 Configuring LAN teaming 71
6 Power supply unit (PSU) 73
6.1 Safety notes 73
6.2 Basic information 73
6.3 Replacing the standard PSU 73
Content
TX1310 M5 Upgrade and Maintenance Manual
To Next Page
Loading...
Need help?
General