Why can't I create a profile with my Fujitsu ScanSnap S300 Scanner?
If you cannot create a profile with your Fujitsu Scanner due to the current settings, it may be because the ScanSnap is in Quick Menu Mode. To create a profile with specific settings, uncheck [Use Quick Menu] and switch to Left-Click Menu Mode.
Why are scanned images from my Fujitsu ScanSnap S300 not oriented correctly?
If the orientation of scanned images from your Fujitsu Scanner is incorrect when [Allow automatic image rotation] is enabled, it may be due to the document's content. Refer to [Allow automatic image rotation].
Why are scanned images not displayed when using Fujitsu ScanSnap S300 Scanner?
If scanned images are not displayed when [Allow automatic blank page removal] is enabled on your Fujitsu Scanner, it's possible that nearly blank documents are being mistakenly recognized as blank pages and removed. To resolve this, right-click the ScanSnap Manager icon on the taskbar, select [Setting] D [Scanning] tab, click the [Option] button, and then clear the [Allow automatic blank page removal] checkbox.
Why does the Fujitsu ScanSnap S300 Scanner create same file size for black and white and color images?
If your Fujitsu Scanner produces the same file size for both black & white and color images, it's likely that the B&W document was scanned in color mode. To fix this, select [B&W] from the [Color mode] drop-down list on the [Scanning] tab in the [ScanSnap Manager D Scan and Save Settings] dialog box.
Why is my Fujitsu Scanner not recognized after installing ScanSnap Manager?
If your Fujitsu Scanner isn't recognized even after installing ScanSnap Manager, it might be because the scanner was connected to your PC before the software installation. Check Device Manager to see if the scanner is listed as 'Other device' or 'Unknown Device.' If so, delete the device name (such as USB device) under the 'Other Device' section in Device Manager and then restart your PC.
Why won't my Fujitsu ScanSnap S300 turn on?
Your Fujitsu Scanner may not turn on due to several reasons. Ensure the power or USB cable and USB bus power cable are correctly connected to the computer, especially when using a hub—verify its power supply. If using a USB bus power cable, a powered USB hub with an AC adapter is necessary, as a non-powered hub may cause malfunction. Try disconnecting and reconnecting the power or USB bus power cable, waiting at least 5 seconds before reconnecting. Also, make sure the paper chute is open and that Windows has completely started, as the LED might turn off during startup or sleep mode.
How to fix multi-feed errors on Fujitsu ScanSnap S300?
To address frequent multi-feed errors on your Fujitsu Scanner, start by cleaning the Pad ASSY. If cleaning doesn't resolve the issue, the Pad ASSY may be worn and require replacement. Also, ensure the document stack is not thicker than 1 mm; reduce the number of sheets if necessary.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning doesn't start on your Fujitsu Scanner, make sure ScanSnap Manager for the ScanSnap S300 is installed. Also, ensure the USB cable is correctly connected, paying attention to the hub's power supply if one is in use. When using a USB bus power cable, use a powered USB hub equipped with an AC adapter. Try disconnecting and then reconnecting the power or USB bus power cable, waiting at least 5 seconds before reconnecting.
What to do if my Fujitsu Scanner is scanning too slowly?
If your Fujitsu Scanner is running slowly, first check if your PC meets the recommended system requirements. If not, at [Scanning] D [Option] in the [ScanSnap Manager D Scan and Save Settings] dialog box, clear the checkboxes of the following to increase the scanning speed: Correct skewed character strings automatically, Allow automatic image rotation. Also, ensure you're not using a USB 1.1 connection; if your PC has a USB 2.0 port, connect the scanner to it, ensuring any USB hub also supports USB 2.0.
What to do if Fujitsu Scanner scanning does not start?
If your Fujitsu Scanner isn't starting the scanning process, first, ensure that ScanSnap Manager for the ScanSnap S300 is installed. Connect the USB cable correctly, checking the hub's power supply if you're using one, and use a powered USB hub with an AC adapter if using a USB bus power cable. Try disconnecting and reconnecting the power or USB bus power cable, waiting at least 5 seconds before reconnecting. If scanning after resuming from hibernation, move the mouse or press a key beforehand. Also, confirm that ScanSnap Manager is running; if the icon isn't displayed, start it from the Start menu.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | - bit |
| Maximum scan size | 216 x 360 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CIS |
| Minimum scan area (ADF) | 50.8 x 50.8 mm |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Auto document feeder (ADF) input capacity | 10 sheets |
| Bundled software | ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2 |
| Scan media weight | 64 - 104.7 g/m² |
| Dimensions (WxDxH) | 284 x 95 x 77 mm |
| Power requirements | AC 100V to 240V, 50 / 60 Hz |
| Dimensions (W x D x H) (imperial) | 11.18 x 3.74 x 3.03 \ |
| Maximum scan area (ADF) (imperial) | 8.5 x 14.17 \ |
| Minimum scan area (Auto Document Feeder) | 2 x 2 \ |
| Minimum RAM | 512 MB |
| Minimum storage drive space | 920 MB |
| Compatible operating systems | Windows 2000 Professional, Windows XP, Windows Vista |
| Power supply type | AC/USB |
| Power consumption (standby) | 5 W |
| Power consumption (typical) | 9 W |
| Sustainability certificates | ENERGY STAR |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | RoHS |
Weight and Dimensions| Weight | 1400 g |
|---|
Verify all items are present in the scanner package upon unpacking.
Describes the names and functions of the scanner's parts.
Explains how to install the ScanSnap Manager, Organizer, and CardMinder software.
Details how to connect the ScanSnap scanner to your personal computer.
Describes the scanning flow from document loading to saving as PDF.
Lists the paper sizes supported by the ScanSnap scanner.
Provides instructions on how to load documents into the scanner.
Explains the ScanSnap Manager icon and its associated menus.
Guides users on how to modify various scanning parameters.
Details how to create and manage scanning profiles (preferences).
Describes how to use the ScanSnap Quick Menu for performing actions.
Explains how ScanSnap interacts with other applications automatically.
Introduces the frequently used functions available in the Action List.
Explains how to save scanned images to a shared network folder.
Guides on sending scanned documents as email attachments.
Details how to use the ScanSnap to print scanned images directly.
Explains how to use ScanSnap Manager for optimized scanning.
Provides instructions for scanning business cards using CardMinder.
Describes how to use ScanSnap Organizer for displaying and sorting images.
Provides steps to remove jammed documents from the scanner.
Lists common problems and their solutions for the ScanSnap.
Instructions for cleaning the external parts of the scanner.
Guides on how to clean the internal components of the scanner.
To Next Page
