Fujitsu ScanSnap User Manual

a The [ScanSnap Manager - Book Image Viewer] window appears in the point retouch mode.
4. Click on a finger captured in a scanned image with the mouse.
a When a finger is detected, it is indicated with a red dashed outline.
To change a range of the outline, drag the white dot on the outline.
HINT
When a finger captured in a scanned image is not detected, a default outline is displayed
around the finger.
In that case, drag the white dot on the outline to align the outline with the shape of the finger.
Scanning a Document
137

Fujitsu ScanSnap Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Grayscale Depth	8-bit
Supported Operating Systems	Windows, macOS
Document Feeder Capacity	50 Sheets
Scanner Type	Sheetfed
Interface	Wi-Fi
Image Sensor	CIS
Scanning Technology	Color
Maximum Document Size	8.5" x 14"
Minimum Document Size	2" x 2"
Power Consumption	1.5 W or less
Dimensions (W x D x H)	6.3" x 6.3"
Weight	7.7 lbs
Scan Speed (Color, A4, 300 dpi)	30 ppm / 60 ipm