Fujitsu ScanSnap - Enabling or Disabling Scansnap Folder

Enabling or Disabling ScanSnap Folder
You can enable or disable ScanSnap Folder.
Enabling or disabling ScanSnap Folder causes the following changes:
l Whether the "ScanSnap Folder" folder is displayed under [Computer] ([My Computer] for
Windows XP)
l For Windows 8.1/Windows 8/Windows 7/Windows Vista, whether there is a shortcut to the
"ScanSnap Folder" folder in [Favorites] ([Favorite Links] for Windows Vista)
ATTENTION
To enable or disable ScanSnap Folder, log on as a user with Administrator privileges.
Enable or disable ScanSnap Folder in the following procedure.
1. Select [ScanSnap Folder Settings] from the Right-Click Menu.
a The ScanSnap setup window appears.
2. In the [Application] tab, click the [Application Settings] button.
a The [ScanSnap Folder - Options] window appears.
3. Click the [Enable] or [Disable] button.
a A message appears to confirm whether you want to switch the availability of ScanSnap
Folder.
4. Click the [Yes] button.
a ScanSnap Folder is enabled or disabled.
When enabling or disabling ScanSnap Folder is complete, a message is displayed to notify
that the operation is successfully completed.
HINT
For Windows 8.1/Windows 8/Windows 7/Windows Vista, a confirmation message may appear
after you click the [Yes] button.
When a confirmation message appears, click the [Yes] button to enable or disable ScanSnap
Folder.
5. Click the [OK] button to close all open windows.
Enabling or Disabling ScanSnap Folder
85