Fujitsu ScanSnap User Manual

Changing the Settings of Linked Applications
Depending on the types of linked applications, you can use application-specific settings or enable
settings that have been specified on linked applications.
This section explains how to specify the settings of linked applications.
To change the settings using the Quick Menu
Move the mouse cursor to the application icon, and then click .
For applications whose settings cannot be changed, does not appear.
To change the settings in the ScanSnap setup window
In the ScanSnap setup window, select a linked application on the [Application] tab, and click the
[Application Settings] button. For applications whose settings cannot be changed, the [Application
Settings] button is not available.
For details about the settings that can be configured in each application, refer to the ScanSnap
Manager Help or the manual for the relevant application.
Changing the Settings of Linked Applications
171

Fujitsu ScanSnap Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Grayscale Depth	8-bit
Supported Operating Systems	Windows, macOS
Document Feeder Capacity	50 Sheets
Scanner Type	Sheetfed
Interface	Wi-Fi
Image Sensor	CIS
Scanning Technology	Color
Maximum Document Size	8.5" x 14"
Minimum Document Size	2" x 2"
Power Consumption	1.5 W or less
Dimensions (W x D x H)	6.3" x 6.3"
Weight	7.7 lbs
Scan Speed (Color, A4, 300 dpi)	30 ppm / 60 ipm