Fujitsu ScanSnap User Manual

Deleting Applications
This section explains how to delete an application.
1. Select [Scan Button Settings] from the Right-Click Menu.
a The ScanSnap setup window appears.
2. In the [Application] tab, click the [Application Settings] button.
a The [Applications to Show/Hide] window appears.
3. Click the [Settings] button.
a The [Add or remove application] window appears.
4.
Select an application to be deleted, and click the [Remove] button.
a A confirmation message appears.
5. Read the message, and then click the [Yes] button.
a The application is deleted from the [Add or remove application] window.
6. Click the [Close] button to close the window.
a The application is deleted from [Application] and the Quick Menu.
HINT
When the [Use Quick Menu] checkbox is cleared in the ScanSnap setup window, clicking the [Add or
Remove] button in the [Application] tab displays the [Add or remove application] window.
Managing Linked Applications
178

Fujitsu ScanSnap Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Grayscale Depth	8-bit
Supported Operating Systems	Windows, macOS
Document Feeder Capacity	50 Sheets
Scanner Type	Sheetfed
Interface	Wi-Fi
Image Sensor	CIS
Scanning Technology	Color
Maximum Document Size	8.5" x 14"
Minimum Document Size	2" x 2"
Power Consumption	1.5 W or less
Dimensions (W x D x H)	6.3" x 6.3"
Weight	7.7 lbs
Scan Speed (Color, A4, 300 dpi)	30 ppm / 60 ipm