Fujitsu ScanSnap User Manual

Scanning Only One Side of a Document (Not
Applicable to either S1100 or SV600)
To scan only one side of a document, in the [Scanning] tab of the ScanSnap setup window, select
[Simplex Scan] in the [Scanning side] drop-down list.
HINT
When you select [Simplex Scan] from the Right-Click Menu, scanning is performed in simplex mode
even if [Duplex Scan] is specified for [Scanning side] in the [Scanning] tab.
Scanning Only One Side of a Document (Not Applicable to either S1100 or SV600)
87

Fujitsu ScanSnap Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Grayscale Depth	8-bit
Supported Operating Systems	Windows, macOS
Document Feeder Capacity	50 Sheets
Scanner Type	Sheetfed
Interface	Wi-Fi
Image Sensor	CIS
Scanning Technology	Color
Maximum Document Size	8.5" x 14"
Minimum Document Size	2" x 2"
Power Consumption	1.5 W or less
Dimensions (W x D x H)	6.3" x 6.3"
Weight	7.7 lbs
Scan Speed (Color, A4, 300 dpi)	30 ppm / 60 ipm