Fujitsu ScanSnap - Changing the Display Order of Profiles

Changing the Display Order of Profiles
This section explains how to change the display order of profiles.
However, you cannot change the [Standard] display order.
1. Select [Profile Management] from the Right-Click Menu.
a The [ScanSnap Manager - Profile Management] window appears.
HINT
l If you cannot select [Profile Management] in the Right-Click Menu, clear the [Use Quick
Menu] checkbox in the ScanSnap setup window.
l You can also display the [ScanSnap Manager - Profile Management] window by selecting
[Profile Management] from [Profile] in the ScanSnap setup window.
2. Select a profile from the list to arrange profiles in a different order.
3. Click the [Up] or [Down] button to move the profile to a desired position in
the list.
Profile Management
75