Using Profiles to Perform Scanning
This section explains how to use profiles to perform scanning.
The following explains an example in which the scanned image file is saved to ScanSnap Organizer.
1. Select [Scan Button Settings] from the Right-Click Menu.
a The ScanSnap setup window appears.
2. Clear the [Use Quick Menu] checkbox.
HINT
When you connect SV600 and another ScanSnap to a computer, a drop-down list for changing
the ScanSnap to use is displayed. For details, refer to "When Two ScanSnaps Are Connected to
a Computer (For SV600)" (page 189).
3. Click the [OK] button to close the ScanSnap setup window.
4. Select [Standard] from the Left-Click Menu.
Using Profiles to Perform Scanning
65
To Next Page
Loading...
