Fujitsu ScanSnap User Manual

If you edit in the book image correction mode after editing in the point retouch mode, the edited
results in point retouch mode are overridden.
HINT
l Up to five fingers on each side (right/left) can be filled in.
l To prevent image deterioration, select and fill in as many fingers as possible in one go.
1. On the window that appears after a book is scanned, select [Correct and
save double-page spread document images (book/magazine)] and click the
[Check/Correct] button.
For details about scanning, refer to the Basic Operation Guide.
a The [ScanSnap Manager - Book Image Viewer] window appears.
2. Select the page for filling in captured fingers in [Final image].
3. Click .
4. Click on a finger captured in a scanned image with the mouse.
a When a finger is detected, it is indicated with a red dashed outline.
To change a range of the outline, drag the white dot on the outline.
Scanning Books
149

Fujitsu ScanSnap Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Color Depth	24-bit
Grayscale Depth	8-bit
Supported Operating Systems	Windows, macOS
Document Feeder Capacity	50 Sheets
Scanner Type	Sheetfed
Interface	Wi-Fi
Image Sensor	CIS
Scanning Technology	Color
Maximum Document Size	8.5" x 14"
Minimum Document Size	2" x 2"
Power Consumption	1.5 W or less
Dimensions (W x D x H)	6.3" x 6.3"
Weight	7.7 lbs
Scan Speed (Color, A4, 300 dpi)	30 ppm / 60 ipm