4. ROUTES
4-4
4.2.3 How to insert a waypoint in a route
To insert a waypoint in a route, do the following:
1. Press the MENU key twice to show the main menu.
2. Select [Routes], and press the ENT/CNTR key.
3. Select [Alpha] or [Distance], and press the ENT/CNTR key to show the route list.
4. Select the route to edit, and press the ENT/CNTR key.
5. Select [Edit], and press the ENT/CNTR key to show the route list.
6. Select the waypoint which will come after the waypoint to be inserted, and press
the ENT/CNTR key.
7. Select [Add], and press the ENT/CNTR key.
8. Select [Alpha] or [Distance], and press the ENT/CNTR key to show the waypoint
list.
9. Select the waypoint, and press the ENT/CNTR key.
10. Press the MENU key several times to close the menu.
4.2.4 How to temporarily deselect a waypoint in a route
You can temporarily deselect an unnecessary waypoint from a route. Using the route
created in the illustration shown below as an example, deselect the second interme-
diate waypoint.
If you reconstruct the route without the second intermediate point it would look like the
illustration below.
1. Press the MENU key twice to show the main menu.
2. Select [Routes], and press the ENT/CNTR key.
3. Select [Alpha] or [Distance], and press the ENT/CNTR key to select the route list.
4. Select the route to edit, and press the ENT/CNTR key.
5. Select [Edit], and press the ENT/CNTR key to show the route information.
6. Select the waypoint to skip, and press the ENT/CNTR key.
Intermediate point 2
(WPT 002)
KOBE
(Starting point)
Intermediate
point 1
(WPT 001)
Intermediate point 3
(WPT 003)
OSAKA
(Arrival point)
WPT 002
SKIP "002"
WPT 001
KOBE
WPT 003
OSAKA
To Next Page
Loading...
