Ship To Center (only when the plotter display is shown)
Tracks Rec (Off, Distance, Auto; 0.00 to 9.99, 0.10 nm)
Color (Red, Yellow, Green, Blue, Purple, Black, Brown)
Delete (All, By Color)
Track Memory Used (**%)
Alpha
Distance
Alpha
Distance
Auto Waypoint Entry (COG)
(Off, On: 15 to 150 , 1 to 60 s)
COG Line (Off, On)
COG/BRG ref. (True, Mag)
Magnetic Variation (Auto, Manual)
WP Name (Disp Goto, Disp All, Disp Route)
TTG/ETA SPD (Auto; 60s, Manual; 20 kn)
Buzzer (Short, Long, Continuous)
Arrival/Anchor
(Off, Arrival, Anchor, 0.00 to 99.99 nm)
XTE (Off, On, 0.000 to 99.999 nm)
Speed (Off, On, 0.0 to 999.9 kn)
WAAS (Off, On)
Time (Off, On; 00:00 to 23:59)
Trip (Off, On; 0 to 99999 nm)
Odometer (Off, On; 0 to 99999 nm)
Waypoints
Routes
Alarms
Messages (Alarm and error messages are shown when occurred.)
Delete
All Waypoints (Off, Delete)
All Routes (Off, Delete)
Bold Italic: Default setting
Plotter Setup
Zoom (only when the plotter/highway display is shown
Plotter: 0.5kn, Highway: 2kn)
I/O Setup
WAAS
GPS Setup
Datum (WGS84, WGS72, Other; 003 to 173)
Navigation (Rhumb Line, Great Circle)
Smooth Position (0 to 999 s, 0 s)
Smooth S/C (0 to 9999 s, 5 s)
Lat Offset (0.000 N/S to 9.999 N/S, 0.000’ N)
Lon Offset (0.000 E/W to 9.999 E/W, 0.000’E)
Disable SV
SV ELV (5 to 90°, 5°)
Roll Over
Mode (WAAS, GPS)
WAAS Search (Auto, Manual; 120 to 138)
Data 1 (REM1, REM2, AP, GPS)
NMEA0183 Version (1.5, 2.0, 3.0)
Save WPT/RTE -> USB
Load WPT/RTE <- USB
Load WPT/RTE <- GP-32
Wiring Info. NMEA 0183
Display 1 (Digital, Speedometer, COG, Off; 0-20, 0-40, 0-80)
Display 2 (Digital, Speedometer, COG, Off)
User Display
(
Continued on next page.)
MENU
key
(press)
To Next Page
Loading...
