9. FILE OPERATIONS
9-3
9.3 How to Import User Objects
You can import points, routes and boundary lines to the internal memory of this unit,
using a SD card, microSD card or USB flash memory.
1. Put the appropriate media in the USB port or a slot in the SD Card Unit.
For TZTL12F/TZTL15F users: Put a microSD card in either slot on the SD Card
Unit.
For TZT2BB users: Put a SD card in the right-hand slot of the Switch Box (PSD-
003).
2. Open the Home screen, then tap [Files][Import User Objects]. A list of files
stored on the inserted media appears.
3. Tap the file(s) to import. You are asked if you are sure to import the selected items.
4. Tap the [OK] button. The message "IMPORT SUCCEEDED" appears if the im-
porting was successful.
5. Tap the [OK] button.
6. Tap the close button to finish.
Points and routes files
SDCARDRIGHT
To Next Page
Loading...
