10. CAMERA/VIDEO/EXTERNAL EQUIPMENT
10-6
FLIR camera
Images from an infrared camera allow you to navigate easily at night or in bad weath-
er. Open the home screen, then tap [Settings][Camera][FLIR Installation].
Note: To use the PTZ function of the FLIR camera with the NavNet TZtouch2, a set-
ting (Nexus CGI Interface, port: 8090) is required at the FLIR camera. See the opera-
tor’s manual of the FLIR camera for details.
Scan IP: Tap [Scan IP] to scan the IP address automatically when connecting an FLIR
camera.
FLIR IP: Enter the IP address manually with the software keyboard then tap [].
Video Source: Select the port where your FLIR camera is connected.
Camera Model: Select the FLIR camera model connected to your MFD.
• FLIR M-Series: M132, M324CS, M324S
• FLIR M200: M232
• FLIR M400: M400
Camera Offset (Right-left): Adjust the side position of the FLIR camera.
Camera Offset (Up-Down): Adjust the up-and down position of the FLIR camera.
Automatic Zoom: Turn on to turn on the automatic zoom.
Zoom Distance: Set the distance to zoom automatically.
Camera Altitude: Set the altitude for the FLIR camera.
To Next Page
Loading...
