12. INSTRUMENT-RELATED DISPLAYS
12-16
12.1.5 Instrument theme
The instrument theme is available in black or white. To change the theme, go to the
home screen and tap [Settings] - [General]. Set [Instrument Theme] to [Black] or
[White]. The setting also controls the graphic format navigation data displays in the
data area.
12.1.6 Fuel management system
This equipment can calculate the remaining fuel from the total fuel and the fuel con-
sumption rate. This function requires the NMEA 2000 sentence PGN127489 (Engine
Fuel Rate).
Note: The remaining fuel calculation is for reference purposes. Do not use the results
for navigation planning or emergency purposes. During an entire voyage, select one
NavNet Ztouch2 unit for the calculation at start-up. The calculation of remaining fuel
is not done when the unit is powered off.
How to manually enter fuel tank capacity
1. From the home screen, tap [Settings][Initial Setup].
2. At [Total Fuel Capacity], enter your vessel’s total fuel capacity.
3. Set the flipswitch of [Manual Fuel Management] to [ON].
4. Tap [OK] to finish.
To Next Page
Loading...
Need help?
General