12. INSTRUMENT-RELATED DISPLAYS
12-15
How to add an instrument display
Ten full size and six split screen instrument displays are preset in this equipment. If
the displays do not meet your requirements, you may add custom displays as neces-
sary. A maximum of ten each of full screen and split screen displays is available.
1. Tap the instrument display to show the pop-up menu, then tap [Add Page] on the
menu.
Note: If you have reached the capacity for the screen configuration selected, [Add
Page] is grayed out. Remove an unnecessary page referring to "How to remove
an instrument display" on page 12-14.
2. The software keyboard appears; enter a name for the page then tap []. A blank
page appears.
3. Tap the blank page to show the [Add Instrument] pop-up menu.
4. Tap the item to add.
5. Repeat step 4 to add other items.
6. After you have added all items required, tap [End Edit].
The page name appears in the [Choice of The Config Type] pop-up menu.
To Next Page
Loading...
