12. INSTRUMENT-RELATED DISPLAYS
12-14
How to add an indication to an instrument display
1. Prepare the display for editing as shown in "How to prepare for
editing" on page 12-11.
2. Tap an unoccupied position on the display to show the [Add Instrument] pop-up
menu. (If there is no space available, remove an unnecessary indication following
the procedure in "How to edit, remove an indication in an instrument
display" on page 12-12.).
3. Tap a size in [GRAPHIC], [NUMERIC], [HIGHWAY], [HISTORICAL GRAPH],
[TANK] or [NAVPILOT] (if available).
For [GRAPHIC] and [NUMERIC], an indication is automatically selected. These
are an analog/digital clock with month and day, and the time and date, respective-
ly.
For [HISTORICAL GRAPH] and [TANK], the indication is also automatically se-
lected. These are COG and fuel, respectively.
4. To change the graphic or numeric indication, see "How to edit, remove an indica-
tion in an instrument display" on page 12-12.
How to rename an instrument display
Show the instrument display that you want to rename. Tap the display to show the
pop-up menu, then tap [Rename Page] on the menu. The software keyboard appears.
Change the name, then tap [] to confirm the name and close the keyboard.
How to remove an instrument display
Show the instrument display that you want to remove. Tap the instrument display to
show the pop-up menu, then tap [Remove Page] on the menu.
To Next Page
Loading...
