15. OTHER FUNCTIONS
15-3
* In the demo mode, plotter display, you can relocate the boat icon to the location
tapped. Tap the screen where you want to relocate the boat icon, then tap [Move Boat]
on the pop-up menu.
15.2 Units Menu
The [Units] menu sets the unit of measurement for speed, distance, depth, etc.
[Check for Soft-
ware Update]
Checks if your software is up-to-date. See
section 15.5.
-
[Reset Default
Settings]
Restore default settings for the items of the [Gen-
eral] menu.
-
Menu item Options
[Bearing Display] [Magnetic], [True]
The mode (magnetic or true) of all heading and bearing data.
[True Wind Calculation
Reference]
[Ground], [Surface]
Select wind value to display from speed over ground or speed through
water (surface).
[Position Format] [DDD°MM.mmmm’], [DDD°MM.mmm’], [DDD°MM.mm’],
[DDD°MM’SS.ss’], [DDD.dddddd°], [Loran-C], [MGRS].
[Loran C Station &GRI] Enter Loran C Station and GRI. Available when [Position Format] is se-
lected to [Loran-C].
[Short/Long Change Over] Set the distance at which to switch between short and long range (set-
ting range: 0.0 to 2.0 NM). If the setting is 0.5, for example, short range
is automatically selected when the long range unit is 0.4 or less. The
setting "0.0" fixes the unit to long range.
[Range (Long)] [Nautical Mile], [Kilometer], [Mile]
[Range (Short)] [Foot], [Meter], [Yard]
[Depth] [Foot], [Meter], [Fathom], [Passi Braza]
[Height/Length] [Foot], [Meter]
[Fish Size] [Inch], [Centimeter]
[Temperature] [Fahrenheit Degree], [Celsius Degree]
[Boat Speed] [Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
[Wind Speed] [Knot], [Kilometer per Hour], [Mile per Hour], [Meter per Second]
Menu item Function Options
To Next Page
Loading...
