Gantner GT7.2x00 Installation/Configuration

GT7 Terminal
General Information
www.gantner.com HB_GT7-2x00-3x00--EN_12 13
2 GENERAL INFORMATION
2.1 Intended Use
The GT7 terminal is a multipurpose device that allows different functions to be implemented through the installation
of various apps. The intended uses include:
- The control of turnstiles and doors (G7 Access App).
- The display of locker information or visitor information (G7 Info App).
- The timed control of devices such as solariums and spas (G7 Time App).
- The display of a countdown for using time-limited services such as showers and power plates (G7 Countdown App).
- The central reader in a networked locker system (G7 Central Locker App).
- The acquisition and display of personnel time and attendance information (G7 Time & Attendance App).
- An interface for gathering customer feedback (G7 Customer Feedback App).
- The enrollment and writing of fingerprint data onto users’ data carriers (G7 Enrollment App).
2.2 System Overview
The following figure shows the typical application of a GT7 terminal system.
1. Power supply
2. Network cable (Ethernet)
3. Network
4. To server
5. RFID data carrier
6. Electronic lock
7. Door contact
8. Network and supply (PoE)
9. Electronic locker locks (info display of locker no.)
10. Sunbed (time control)
11. Relay box
Figure 2.1 – Typical application of the GT7 terminal

Gantner GT7.2x00 Specifications

General

Brand	Gantner
Model	GT7.2x00
Category	Touch terminals
Language	English