Gantner GT7.2x00 - Display

GT7 Terminal
Configuration
50 HB_GT7-2x00-3x00--EN_12 www.gantner.com
5.6.9 Display
Figure 5.30 – GT7 terminal web interface - Display
These settings determine the brightness of the GT7 terminal’s display and when the display should switch to the
screensaver or to the image slideshow.
- Display Brightness: Intensity of the display backlight between 0 and 100%. At 0%, the display is switched
off.
- Display Brightness (Screensaver): Intensity of the display backlight when the screensaver (see below) is enabled.
- Slideshow after: Time in seconds of terminal inactivity after which an image slideshow (i.e., different
pictures from the theme) is displayed. For more information on themes, see "5.6.16.
Installed Apps".
- Next image after: Time in seconds after which the images in the slideshow are changed.
- Screensaver after: Time after which the screensaver is displayed. This time starts to run as soon as the
slideshow is activated.
- Screensaver text: Text that is displayed when the screensaver is active. If no images are selected for the
slideshow, this text will also be displayed when the slideshow is activated.