Gantner GT7.2x00 - Cloud Pairing

GT7 Terminal
Configuration
60 HB_GT7-2x00-3x00--EN_12 www.gantner.com
5.6.17 Cloud Pairing
Figure 5.38 – GT7 terminal web interface - Cloud Pairing
G7 Connect is GANTNER’s cloud service for the convenient management of clients’ projects and systems that
contain G7 Generation devices. To add a GT7 terminal to a project in G7 Connect, the GT7 terminal must first be
paired with G7 Connect once. This requires a pairing key, which is displayed on this page.
► Log in to G7 Connect (https://gantner.cloud) with your username and password.
o The home page ("Dashboard") is displayed.
► Click on "Projects".
Figure 5.39 – Cloud pairing – Dashboard