GT7 Terminal
Configuration
68
HB_GT7-2x00-3x00--EN_12
www.gantner.com
5.6.21 Update Firmware
Figure 5.48 – GT7 terminal web interface – Firmware Update
Here, the firmware currently installed in the GT7 terminal is displayed.
► To install new firmware, drag the firmware file to the "Drop Firmware here" field.
► Click on "Update Firmware".
o The new firmware is loaded into the GT7 terminal and the device restarts.
ATTENTION! During the firmware update, ensure that the power supply to the GT7 terminal is not
disconnected.
To Next Page
Loading...
