GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
47
5.6.6 WLAN
Figure 5.27 – GT7 terminal web interface - WLAN Settings
A GT7 terminal can communicate via Wi-Fi instead of over the LAN network. If Wi-Fi is enabled, more options
become available.
- Enable WLAN: With this option, WLAN can be activated or deactivated.
- DHCP assigned IP address: How the IP address is set is defined here. Select the option to obtain the address
automatically from a DHCP server. If disabled, the static IP addresses can be entered
into the “Static IPv4” configuration area.
- SSID: Enter the name of the WLAN network here.
- Authentication: Select "WPA PSK" here for the WLAN encryption method. You can then enter the
PSK Key (password for the wireless network).
To Next Page
Loading...
