Gantner GT7.2x00 Installation/Configuration

GT7 Terminal
Configuration
www.gantner.com HB_GT7-2x00-3x00--EN_12 39
5.6 Configuration via Web Interface
Provided that the terminal is reachable via the network, a GT7 terminal can be directly accessed via a web browser.
All settings for the device and the installed GT7 apps are available for configuration in the web interface.
► Open a web browser.
► Enter the IP address of the GT7 terminal into the address bar.
The IP address of the GT7 terminal is displayed on the screen in the first row (eth0) during startup, i.e.,
when the supply voltage is applied.
The IP address can also be accessed in the configuration menu of the GT7 terminal (see "5.4
Configuration via the GT7 Terminal”).
Figure 5.19 – Start-up screen of the GT7 terminal
o The login page of the GT7 web interface opens in the web browser.
Figure 5.20 – Login screen of the GT7 terminal
► In the login window, enter your username and password and click on "Login".

Gantner GT7.2x00 Specifications

General

Brand	Gantner
Model	GT7.2x00
Category	Touch terminals
Language	English