Gantner GT7.2x00 - Device Info

GT7 Terminal
Configuration
www.gantner.com HB_GT7-2x00-3x00--EN_12 31
5.4.1 Device Info
Device information is displayed on the five sub-pages of this menu. Most of the settings shown here can
be configured via the device configuration page (see “5.4.3 Device Configuration”).
General Device Info
Figure 5.4 – Device Info – Page 1, General
- Device type: The type/model of GT7 terminal (e.g., GT7.3300).
- Serial number: The serial number the device.
- Article number: The article number the device.
- Hardware: The hardware version running on the device.
- Firmware: The firmware version running on the device.
- License points: The number of device licenses (points) that have loaded to the device. Each app
requires a certain number of points to operate (see chapter “5.6.18 Licensing”).
- Open card: When “true” is shown here, the GT7 terminal can read the UID number of third-party
data carriers, i.e., those not sold by GANTNER. To activate this function, the “G7
Device License Points Open Card” license code must be purchased and entered into
the web interface (see chapter “5.6.18 Licensing” for more information).
Network Settings
Figure 5.5 – Device Info – Page 2, Network
- IP: The IP address of the device.
- MAC: The MAC address of the device.
- Wlan: Whether WLAN is operating (enabled) on the device or not (disabled).