GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
53
5.6.12 Fingerprint
Figure 5.33 – GT7 terminal web interface – Fingerprint
This setting is only effective when a fingerprint reader is used with the GT7 terminal. The settings here determine
the level of accuracy of the fingerprint reader; 1 = lowest level, 10 = highest level. Certain people (e.g.,
tradespersons who work with their hands) may have weaker fingerprints than others. If many users are having
difficulty reading their fingerprint, it may help to lower this value.
- Level at verification: This value determines the accuracy of the fingerprint reader for verification, i.e., when
the fingerprint is used as additional confirmation of identification after identification via
data carrier or similar.
- Level at identification: Similar to the previous "Level at verification" setting, this value determines the accuracy
of the fingerprint reader for identification, i.e., when the fingerprint is used as the
primary means of identification for the user.
To Next Page
Loading...
Need help?
General
