Gantner GT7.2x00 - Certificate Management

GT7 Terminal
Configuration
64 HB_GT7-2x00-3x00--EN_12 www.gantner.com
5.6.19 Certificate Management
Figure 5.45 – GT7 terminal web interface - Certificate management
Here, the certificates stored in the GT7 terminal are displayed. The certificates are used to verify the authenticity
and integrity of persons and/or objects, especially when communicating over the Internet or network, which can
prevent unauthorized access and manipulation.
► Click on “Show certificates” at the top.
o The following menu is displayed.
Figure 5.46 – GT7 terminal – Show certificates menu
With the "Show certificates" option, the installed certificates are listed as previously described. The following
functions can be performed with the options in this menu.
- Add CA certificate: Add a certificate issued by a certification authority (CA). To do this, drag the file with
the certificate (in PEM format) to the location in this window and click on "Add CA
certificate".