GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
51
5.6.10 Data Carrier
Figure 5.31 – GT7 terminal web interface – Data carrier
Here, the settings for the data carrier types to be used with the GT7 terminal are configured. These settings must be
set correctly so that the data carriers can be used. Multiple data carrier types can be configured.
- Add Data Carrier: To configure a new data carrier type, click here and select the desired type from the
list.
- Delete Data Carrier: You can delete an existing data carrier type or a segment in the data carrier via the
trash icons to the right.
The settings for the data carrier types vary depending on the type of data carrier you are using. For questions
regarding the exact settings, please speak to your sales partner.
To Next Page
Loading...
Need help?
General
