Gantner GT7.2x00 - Page 27

GT7 Terminal
Electrical Connections
www.gantner.com HB_GT7-2x00-3x00--EN_12 27
► Depending on the Ethernet standard being used, terminate the wire colors of the Ethernet cable to the
“ETHERNET PoE” screw terminals (12) as follows.
Terminal
Signal
Wire Color TIA-568A
Wire Color TIA-568B
DC +
PoE supply +
blue/white
blue/white
DC +
PoE supply +
blue
blue
DC –
PoE supply –
brown/white
brown/white
DC –
PoE supply –
brown
brown
Table 4.2 – Wire colors for PoE
► Plug the other end of the cable into an RJ45 socket on the PoE switch (3).