Garmin FENIX E - Map; Viewing the Map; Saving or Navigating to a Location on the Map

Map
Your watch can display several types of Garmin map data, including topographical contours, nearby points of
interest, ski resort maps, and golf courses. You can use the Map Manager to download additional maps or
manage map storage.
To purchase additional map data and view compatibility information, go to garmin.com/maps.
represents your location on the map. When you are navigating to a destination, your route is marked with a
line on the map.
Viewing the Map
1
Select an option to open the map:
•
Press , and select Map to view the map without starting an activity.
•
Go outside, start a GPS activity (Starting an Activity, page17), and press or to scroll to the map
screen.
2 If necessary, wait while the watch locates satellites.
3
Select an option to pan and zoom the map:
•
To use the touchscreen, tap the map, tap and drag to position the crosshairs, and press or to
zoom in or out.
•
To use the buttons, hold , select Pan/Zoom, and press or to zoom in or out.
NOTE: You can press to toggle between panning up and down, panning left and right, or zooming.
4
Hold to select the point indicated by the crosshairs.
Saving or Navigating to a Location on the Map
You can select any location on the map. You can save the location or start navigating to it.
1
From the map, select an option:
•
To use the touchscreen, tap the map, tap and drag to position the crosshairs, and press or to
zoom in or out.
•
To use the buttons, hold , select Pan/Zoom, and press or to zoom in or out.
NOTE: You can press to toggle between panning up and down, panning left and right, or zooming.
2 Pan and zoom the map to center the location in the crosshairs.
3
Hold to select the point indicated by the crosshairs.
4 If necessary, select a nearby point of interest.
5 Select an option:
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select Review.
Map 101