Garmin FENIX E - Getting more Information; My Device Is in the Wrong Language; Tips for Maximizing the Battery Life; Restarting Your Watch

Getting More Information
You can find more information about this product on the Garmin website.
• Go to support.garmin.com for additional manuals, articles, and software updates.
• Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and
replacement parts.
• Go to www.garmin.com/ataccuracy for information about feature accuracy.
This is not a medical device.
My device is in the wrong language
You can change the watch language selection if you have accidently selected the wrong language.
1
From the watch face, hold .
2 Select .
3 Select .
4
Scroll to the seventh item in the list, and press .
5 Select your language.
Tips for Maximizing the Battery Life
To extend the life of the battery, you can try these tips.
• Change the power mode during an activity (Customizing the Power Mode for an Activity, page118).
• Turn on the battery saver feature from the controls menu (Controls, page51).
• Reduce the screen timeout (Display and Brightness Settings, page82).
• Stop using the Always On Display screen timeout option, and select a shorter timeout (Display and Brightness
Settings, page82).
• Reduce the screen brightness (Display and Brightness Settings, page82).
• Use UltraTrac satellite mode for your activity (Satellite Settings, page49).
• Turn off Bluetooth technology when you are not using connected features (Controls, page51).
• When pausing your activity for a longer period of time, use the Resume Later option (Stopping an Activity,
page18).
• Use a watch face that is not updated every second.
For example, use a watch face without a second hand (Customizing the Watch Face, page4).
• Limit the phone notifications the watch displays (Managing Notifications, page88).
• Stop broadcasting heart rate data to paired devices (Broadcasting Heart Rate Data, page98).
• Turn off wrist-based heart rate monitoring (Wrist Heart Rate Monitor Settings, page97).
NOTE: Wrist-based heart rate monitoring is used to calculate vigorous intensity minutes and calories burned.
• Turn on manual pulse oximeter readings (Setting the Pulse Oximeter Mode, page99).
Restarting Your Watch
If your watch stops responding, you can try these steps to restart it.
•
Hold until the watch turns off, and hold to turn on the watch.
• Plug the watch into a USB-C charging port for at least 30 seconds, unplug the cable, and plug the cable in
again.
Is my phone compatible with my watch?
The fēnix watch is compatible with phones using Bluetooth technology.
Go to garmin.com/ble for Bluetooth compatibility information.
126 Troubleshooting