Garmin FENIX E - Editing an Alarm; Using the Countdown Timer

Editing an Alarm
1
Select an option:
•
From the watch face, hold .
•
From the watch face, press .
•
Hold .
2 Select Clocks > Alarms.
3 Select an alarm.
4 Select an option:
• To turn the alarm on or off, select Status.
• To change the alarm time, select Time.
• To set the alarm to repeat regularly, select Repeat, and select when the alarm should repeat.
• To select the type of alarm notification, select Sound & Vibe.
• To select a description for the alarm, select Label.
• To delete the alarm, select Delete.
Using the Countdown Timer
1
Select an option:
•
From the watch face, hold .
•
From the watch face, press .
•
Hold .
2 Select Clocks > Timers.
3
Select an option:
•
To set a countdown timer for the first time, enter the time using the touchscreen or the and
buttons.
• To set a countdown timer without saving it, select Quick Timer, and enter the time.
• To set and save a new countdown timer, select Edit > Add Timer, and enter the time.
• To set a saved countdown timer, select the saved timer.
4
Press to start the timer.
5 If necessary, select an option:
• To stop the timer, select .
• To restart the timer, select .
• To save the timer, select > Save Timer.
• To automatically restart the timer after it expires, select > Auto Restart.
• To customize the timer notification, select > Sound & Vibe.
74 Clocks