Garmin FENIX E - Creating and Following a Course on Your Device; Creating a Round-Trip Course

Creating and Following a Course on Your Device
1
From the watch face, press .
2 Select Map.
3
Press .
4 Select Navigate > Create a Course.
5 Select an option:
• Select Round-Trip Course to create a round-trip course based on a specified distance and direction of
navigation.
• Select Activities to create a course based on a previously-saved activity.
• Select Sight 'N Go to create a straight-line course toward an object you can see in the distance.
• Select Coordinates to create a course to a location based on geographic coordinates.
• Select Use Map to create a course by selecting course points on the map.
6 Select the activity you want to use while following the course.
7 If necessary, follow the on-screen prompts to enter location information.
8
Press to begin navigation.
Creating a Round-Trip Course
The device can create a round-trip course based on a specified distance and direction of navigation.
1
From the watch face, press .
2 Select Map.
3
Press .
4 Select Navigate > Create a Course > Round-Trip Course.
5 Select the activity you want to use while following the course.
6 Enter the total distance for the course.
7
Select a direction heading.
The device creates up to three courses. You can press to view the courses.
8
Press to select a course.
9 Select an option:
• To begin navigation, select Go.
• To view the course on the map and pan or zoom the map, select Map.
• To view a list of turns in the course, select Turn By Turn.
• To view an elevation plot of the course, select Elevation.
• To save the course, select Save.
• To view a list of ascents in the course, select View Climbs.
108 Navigation