Garmin FENIX E - Navigating with Sight N Go; Creating a Course on Garmin Connect; Sending a Course to Your Device

Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a water tower, lock in the direction, and then
navigate to the object.
1
From the watch face, press .
2 Select Map.
3
Press .
4 Select Navigate > Create a Course > Sight 'N Go.
5 Select the activity you want to use while following the course.
6
Point the top of the watch at an object, and press .
Navigation information appears.
7
Press to begin navigation.
Creating a Course on Garmin Connect
Before you can create a course on the Garmin Connect app, you must have a Garmin Connect account (Garmin
Connect, page91).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses > Create Course.
3 Select a course type.
4 Follow the on-screen instructions.
5 Select Done.
NOTE: You can send this course to your device (Sending a Course to Your Device, page109).
Sending a Course to Your Device
You can send a course you created using the Garmin Connect app to your device (Creating a Course on Garmin
Connect, page109).
1 From the Garmin Connect app, select .
2 Select Training & Planning > Courses.
3 Select a course.
4 Select .
5 Select your compatible device.
6 Follow the on-screen instructions.
Navigation 109