Viewing the Tip Sequence
The first time you use the Tempo Training activity, the watch displays a tip sequence to explain how your swing
is analyzed.
1
During your activity, press .
2 Select Tips.
3
Press to view the next tip.
Recording a Bouldering Activity
You can record routes during a bouldering activity. A route is a climbing path along a boulder or small rock
formation.
1
From the watch face, press .
2 Select Activities > Outdoor > Bouldering.
3
Select a grading system.
NOTE: The next time you start a bouldering activity, the watch uses this grading system. You can hold ,
select the activity settings, and select Grading System to change the system.
4 Select the difficulty level for the route.
5
Press to start the route timer.
6 Start your first route.
7
Press to finish the route.
8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
9
When you are done resting, press to start your next route.
10 Repeat this process for each route until your activity is complete.
11
After your last route, press to stop the route timer.
12 Select Save.
Starting an Expedition
You can use the Expedition activity to prolong the battery life while recording a multi-day activity.
1
From the watch face, press .
2 Select Activities > Outdoor > Expedition.
3
Press to start the activity timer.
The device enters low power mode and collects GPS track points once an hour. To maximize battery life, the
device turns off all sensors and accessories, including the connection to your smartphone.
Recording a Track Point Manually
During an expedition, track points are recorded automatically based on the selected recording interval. You can
manually record a track point at any time.
1
During an expedition, press .
2 Select Add Point.
28 Apps and Activities
To Next Page
Loading...
