Garmin FENIX E - Running; Calibrating the Treadmill Distance; Going for a Track Run; Going for a Virtual Run

Running
Going for a Track Run
Before you go for a track run, make sure you are running on a standard-shape, 400 m track.
You can use the track run activity to record your outdoor track data, including distance in meters and lap splits.
1 Stand on the outdoor track.
2
From the watch face, press .
3 Select Activities > Running > Track Run.
4 Wait while the watch locates satellites.
5 If you are running in lane 1, skip to step 8.
6 Select Lane Number.
7 Select a lane number.
8
Press .
9 Run around the track.
10
After you complete your activity, press , and select Save.
Tips for Recording a Track Run
• Wait until the watch acquires satellite signals before starting a track run.
• During your first run on an unfamiliar track, run four laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
• Run each lap in the same lane.
NOTE: The default Auto Lap
®
distance is 1600 m, or four laps around the track.
• If you are running in a lane other than lane 1, set the lane number in the activity settings.
Going for a Virtual Run
You can pair your watch with a compatible third-party app to transmit pace, heart rate, or cadence data.
1
From the watch face, press .
2 Select Activities > Running > Virtual Run.
3 On your tablet, laptop, or phone, open the Zwift
™
app or another virtual training app.
4 Follow the on-screen instructions to start a running activity and pair the devices.
5
Press to start the activity timer.
6
After you complete your activity, press , and select Save.
Calibrating the Treadmill Distance
To record more accurate distances for your treadmill runs, you can calibrate the treadmill distance after you run
at least 2.4km (1.5mi.) on a treadmill. If you use different treadmills, you can manually calibrate the treadmill
distance on each treadmill or after each run.
1 Start a treadmill activity (Starting an Activity, page17).
2 Run on the treadmill until your watch records at least 2.4km (1.5mi.).
3
After you finish the activity, press to stop the activity timer.
4 Select an option:
• To calibrate the treadmill distance the first time, select Save.
The device prompts you to complete the treadmill calibration.
• To manually calibrate the treadmill distance after the first-time calibration, select Calibrate & Save > .
5 Check the treadmill display for the distance traveled, and enter the distance on your watch.
30 Apps and Activities