Appendix
49
Data Fields
The following data fi elds are available in your Quest:
Accuracy GPS – Current GPS accuracy in feet or meters.
Arrive-Destination – Estimated arrival time to your destination.
Arrive-Next
– Estimated time to your next turn.
Bearing
– The compass direction from your location to your destination. (Appears only on the Compass
page.)
Course – The direction from your starting location to a destination. (Appears only on the Compass page.)
Distance-Destination – Distance to your destination.
Distance-Next – Distance to your next turn.
Elevation
– Elevation of your current location.
Heading – The vehicle’s current direction of travel. (Does not appear as a data fi eld option on the Trip
Information page.)
Location (lat/lon)
– Displays longitude and latitude of your current location.
Location (selected) – Displays your current location in a position format you select in the “Location
Format” option in the “Units Setup” section (see page 39). This is for advanced users.
Name-Destination
– Name of your upcoming maneuver or upcoming via point. (Appears only on the
Compass page.)
Name-Next
– Name of your next destination. (Appears only on the Compass page.)
Odometer
– A running total of distance traveled. Unlike the Trip Odometer, the odometer cannot be reset.
Off Course – The distance left or right you are from the original course (path of travel). (Appears only on
the Compass page.)
Power (Battery)
– Indicates battery power status. (Does not appear as a data fi eld option on the Trip Infor-
mation page.)
Appendix B: Data Fields
190-00323-00_0B.indd 49 8/20/2004, 11:08:41 AM
To Next Page
Loading...
