Gateway Notebook User Manual

53
www.gateway.com
Adding and removing a PC Card
Removing a memory card
To remove a memory card:
1 Push the memory card into the notebook. The memory card pops
out slightly.
2 Pull the memory card out of the notebook.
3 Insert the protector into the memory card slot.
Adding and removing a PCCard
Your notebook has a PC Card slot (also known as a PCMCIA card slot).
This slot accepts one Type II card. You do not need to restart your
notebook when changing most cards because your notebook supports
hot-swapping. Hot-swapping means that you can insert a PC Card while
your notebook is running. If your PC Card does not work after
hot-swapping, see the PC Card manufacturer’s documentation for further
information.
Important Do not use the remove hardware icon in the taskbar
to remove the memory card. If you use the remove
hardware icon, your notebook may not recognize your
memory card reader until you restart your notebook.

Gateway Notebook Specifications

General

Brand	Gateway
Category	Laptop
Processor	Varies by model (Intel Celeron, Pentium, Core i3, Core i5, AMD Ryzen)
RAM	Varies by model (8GB, 16GB)
Storage	Varies by model (256GB SSD, 512GB SSD, 1TB HDD)
Display	Varies by model (14-inch, 15.6-inch, FHD)
Operating System	Windows 10 or Windows 11
Graphics	Intel UHD Graphics
Battery	Varies by model
Weight	Varies by model