Gateway Notebook - Disconnecting from the Port Replicator

90
www.gateway.com
Chapter 7: Using the Optional Port Replicator
Disconnecting from the port replicator
You can separate your notebook from the port replicator while your
notebook is off or on (not in Standby or Hibernate mode).
To separate your notebook from the port replicator:
1 If your notebook is off, go to Step 2.
-OR-
If your notebook is on, click
Start, then click Undock Computer. The
Undock Computer menu item appears in the Start menu only while
the notebook is docked.
2 Press down on the docking release latch. The notebook will spring
up slightly.
3 Lift the notebook off of the port replicator.