enhances the system’s elegance while minimizing tube connections,
minimizing circuit volume, and increasing the work surface area.
This anesthesia system is designed for expansion and upgrades, so
it is easy to add new technologies and ventilation capabilities without
investing in a new system.
The anesthesia system is suitable for use in a patient environment.
The system must only be operated by personnel trained and
qualified in the administration of general anesthesia. The User’s
Reference manual is intended to provide training on the operation of
the system. Operate the system from the front with a clear view of
the display. It must be operated according to the instructions in this
User’s Reference manual. Make sure that all user documents are
obtained from the manufacturer.
Refer to the Technical Reference manual for service information
including: special installation instructions, installation checklist,
means of isolating the supply mains, and replacement of fuses,
supply cord, and other parts.
Explosion Hazard. Do not use this system with flammable
anesthetic agents.
Configurations available for this product depend on local market and
standards requirements. Illustrations in this manual may not
represent all configurations of the product. This manual does not
cover the operation of every accessory. Refer to the accessory
documentation for further information.
WARNING
Note
1 Introduction
2067226-001 1-3
To Next Page
Loading...
Need help?
General
